CARTEX GoldCone compatible cartridge filters are designed as a high-performance retrofit solution for industrial dust collection systems. They are engineered for full compatibility with Camfil Farr Gold Series (GS) systems, allowing direct installation without any mechanical modification.
The key advantage of the GoldCone design is the internal conical structure, which creates additional filtration surface inside the filter. This increases airflow capacity, improves dust distribution, and enhances overall system efficiency.
Camfil Farr Goldcone Cartridge Filter Retrofit
| Filter Code | Top Plate Dimensions | Length | Outer Diameter | Filtration Area | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| CG-CN-F9-FR-535x425xØ385-240x995 | 535 mm | 21,1 in | 425 mm | 16,7 in | 995 mm | 39,2 in | 385 mm | 15,2 in | 30 m² | 323 ft² |
| CG-CN-F9-FR-EX-535x425xØ385-240x995 | 535 mm | 21,1 in | 425 mm | 16,7 in | 995 mm | 39,2 in | 385 mm | 15,2 in | 30 m² | 323 ft² |
| CG-PN-F9-FR-535x425xØ385-240x995 | 535 mm | 21,1 in | 425 mm | 16,7 in | 995 mm | 39,2 in | 385 mm | 15,2 in | 21 m² | 227 ft² |
| CG-PN-F9-FR-EX-535x425xØ385-240x995 | 535 mm | 21,1 in | 425 mm | 16,7 in | 995 mm | 39,2 in | 385 mm | 15,2 in | 21 m² | 227 ft² |
| CG-PT-HO-F9-FR-EX-535x425xØ385-240x995 | 535 mm | 21,1 in | 425 mm | 16,7 in | 995 mm | 39,2 in | 385 mm | 15,2 in | 21 m² | 227 ft² |
APC & Camfil Farr Replacement Codes
| APC Code | Camfil Farr Filter Code | Details |
|---|---|---|
| 18525 | 325325001 | HemiPleat / OmniPleat GR Standard Green |
| 18525 | 325325002 | HemiPleat / OmniPleat FR Flame Retardent |
| 18526 | 325325012 | HemiPleat / OmniPleat FR Flame Retardent & Carbon |
| 18525 | 325325014 | XG Extreme Green |
| 18525 | 325325016 | XF Extreme Synthetic |
| 18526 | 325325015 | EXTreme FR & Carbon |
| 18525 | 325325008 | Extreme Synthetic |
| 18527 | 225225001 | Dura-Pleat 260 Polyester |
| 18528 | 225225002 | Dura-Pleat 260 Aluminium |
| 19725 | 225225003 | Dura-Pleat Hydro Oleophobic |
| 19725 | 225225004 | Dura-Pleat PTFE |
| 19725 | 225225005 | PTFE Carbon |
| 18525 | 375375002 | FR Flame Retardent |
| 18526 | 375375012 | FC FR & Carbon Impegratend |
| 18526 | 375375015 | XFC - Extreme Flame R & Carbon |
| 18525 | 375375016 | XF - Extreme Flame Retardent |
| 18527 | 275275001 | DPS - Polyester Standard |
| 18528 | 275275002 | DPA - Polyester Antistatic |
| 19725 | 275275003 | DPO - Oleophobic & Hydrophobic |
| 19725 | 275275004 | DPT - Polyester & PTFE |
| 19725 | 275275005 | DPTC - Polyester PTFE Carbon |
Key Features
- Full compatibility with Camfil Farr GoldCone (Gold Series) systems
- Direct installation (no modification required)
- Increased filtration surface with internal cone design
- Low pressure drop
- Efficient dust release during pulse-jet cleaning
- Reduced compressed air consumption
- Long service life and reduced maintenance
The cone structure improves pulse-jet cleaning by distributing reverse air evenly inside the filter. This allows dust to detach more effectively and fall directly into the hopper.
Filter Media Options
Filters are available with a wide range of media options to match process requirements:
- NANO coated synthetic or polyester media
- Flame retardant filter media
- Conductive (antistatic) media – suitable for ATEX applications
- PTFE membrane – ideal for fine, sticky, or humid dust
- Omniphobic coating – oil and water repellent
Nano fiber technology captures particles on the surface, preventing deep penetration into the media. This improves cleanability and extends filter life.
Standard Design & Dimensions
- Square top plate (GoldCone mounting type)
- Typical dimensions:
- Gasket: ~535 × 425 mm
- Outer diameter: ~380 mm
- Length: ~1000 mm
- Filtration area: approx. 21 – 30 m²
- Construction: Galvanized steel or stainless steel
- Available versions: Standard, antistatic, flame retardant
Applications
- Industrial dust collection systems
- Camfil Farr Gold Series (GS) systems
- High dust load processes
- Continuous production environments
- ATEX and explosive environments
